Optical Fibre patch cords are a defining factor in ensuring your network performs to the highest level. A patch cord can be split into three crucial components, the connector, the cable and the manufacturing process. These three areas all contribute to the performance of a patch cord, but above all the manufacturing process is the one that defines the performance of the assembly. Whilst the cable and connectors used in our optical fibre patch cords are the best available, it is our expertise in production that sets our products apart.
We has 10 years experience in selling fibre optic cable assemblies using Biconic and SMA through ST, SC to today’s SmallForm Factor connectors like the LC, MU, MT-RJ or SC-DC. If you have a fibre network, no matter what the technology, ERSB can offer you a solution to your problem.
Our range of patch cords has grown through the years, from every day standard lengths to special products to meet your needs. From industry standard 62.5/125 multimode to 9/125 singlemode right the way up to state of the art OM3 50/125 cable assemblies, We can supply them all. With a our patch cord you canbe confident you are using the very best in cable, connectors and manufacturing.
ORDERING
|
Description The SofeTEK optical fibre patch cords are manufactured using the best quality components. The connectors are the market leading SofeTEK range of connectors, and the cable exceeds all areas of the standards required for the assembly being produced. Non-standard cables can be made to your own exacting standards in our ISO 9001 UK production facility. This encompasses all of the essential tools to ensure the products not only meet but also exceed the requirements laid down in IEC international standards for fibre optic terminations. Optical Performance (Multimode) Insertion loss: Max. 0.3 dB Typical 0.12 dB Optical Performance (Singlemode) Insertion loss: Max. 0.3 dB Typical 0.2 dB Optical Performance (MT-RJ) Insertion loss: Max. 0.5 dB Return Loss: UPC better than 50dB APC better than 60dB IEC 874-1 method |
Connectors Types: FC, FC/APC, ST, SC, SC/APC, MT-RJ, MU, E2000 Mechanical Length: 1000mm to 10,000mm ± 10mm Other lengths available to order Split Length (Duplex): 150mm ± 5mm Sheath colour: 62.5/125 Yellow 50/125 Orange 09/125 Yellow For full information on the SofeTEK connectors used on the SofeTEK patch cords, please contact the address below for a connector data sheet. Intermateability Optically and mechanically compatible with all equivalent connectors. Compliant with IEC 874-14. Product Packaging Each patch cord is packaged individually and individually identified for traceability, test certification is supplied for each assembly. |
Temperature Cycling (IEC 874-1 sec. 4.5.22) -40 to +75°C, 40 cycles =0.2dB Change High Temperature: (IEC 874-1 sec. 4.5.18) 75°C for 96 hours =0.2dB Change Damp Heat: (IEC 874-1 sec. 4.5.19) 60°C at 95% RH, 96 hours =0.2dB Change Vibration (Mated Pair): (IEC 874-1 sec. 4.5.1) 10-55 Hz, 1.5mm P to P =0.3dB Change Mating Durability: (IEC 874-1 sec. 4.5.32) 1000 mating cycles Clean every 25 < 0.2 dB Change Operating Temperature |