DATA & CONNECTIVITY
|
Part
Number |
Description |
Price/Unit (RM) |
|
|
1.6/5.6 Right
Angle Female
Clamp |
|
|
Part
Number |
Description |
Price/Unit (RM) |
|
|
BNC Series |
|
|
Part
Number |
Description |
Price/Unit (RM) |
|
|
1.6/5.6 str
clamp |
|
|
Part
Number |
Description |
Price/Unit (RM) |
|
|
1.6/5.6 Y
Type One
Female to
Two Female |
|
|
Part
Number |
Description |
Price/Unit (RM) |
|
|
1.6/5.6 T
Type One
Male Two
Female |
|
|
Part
Number |
Description |
Price/Unit (RM) |
|
|
1.6/5.6
Right Angle
Male Clamp
.
Patching
systems
provide
the
maximum
flexibility
needed
to
re-route
signals
and
are
used
in
"shielded
cable",
video,
and
RF
application.
These
jacks
may
be
intermixed
on
the
same
panel
provided
the
mechanical
limitations
are
recognized.
|
|
1.6/5.6
Coaxial Connector 75ohm
The 1.6/5.6 series of
connectors offers three
different plug types:
-Snap-on/snap-off
coupling allowing rapid
but secure connections
-Screw coupling for
vibration environments
-Slide-in coupling which
is suitable for rack and
panel systems
The jack for all types
is the same, and will
mate with all three plug
types.
The maximum frequency
for this series is
limited to 1GHz .The
impedance is controlled
at 75ohms for all types,
Versions of this series
connector are available
for mounting to printed
circuit boards using
thru-hole soldered
techniques. Clamp and
crimp techniques are
used to terminate this
series to cables 1.6/5.6
connectors find
applications in many
types of communication
equipment.
1.6/5.6 "T" TYPE, ONE
PLUG TO TWO JACK
|
|
|
N
Coaxial Connector 50 ohm
The N
series a very popular coax
connector. It is a medium
sized precision weatherproof
connector supplied with a
screw coupling. In some
applications this connector
can be used up to 11GHz.Only
50 ohm impedances are
available. Connector styles
are available for flexible,
conformable, semi-rigid and
corrugated cable types. Both
crimp and clamp cable
termination processes are
used for this series.
Special design techniques
for this series of
connectors have resulted in
excellent levels of
performance for return loss
(VSWR) and inter-modulation
distortion (IMP).
Applications for these
connectors vary from signal
patches communication
transmission where vibration
resistance and environmental
protection is required. N’s
are a medium-power
high-frequency solution for
coax connections.
|
|
|
BNC plug crimp |
BNC plug clamp |
BNC jack crimp |
BNC double jack
|
|
|
N male, screw-on
type |
N male, crimp type |
N PLUG R/A CLAMP
|
N PLUG R/A CRIMP
|
|
|
|
TNC
Coaxial Connector 50 or
75ohm
The
TNC series a commonly
used coax connector.
Similar to the BNC, but
supplied with a screw
coupling, this connector
can be used up to
11GHz.Both50 and 75ohm
impedances are
available. Connector
styles are available for
flexible, conformable
and semi-rigid cable
types. Versions of the
TNC connector are
available for mounting
to printed circuit
boards using both
thru-hole press-fit
techniques. Both crimp
and clamp cable
termination processes
are used for this
series. Applications for
these connectors vary
from signal patches to
video transmission where
vibration resistance is
required TNC’s are a
low-cost high-frequency
solution for coax
connectors.
|
|
|
TNC plug clamp |
TNC PLUG CRIMP |
TNC JACK CRIMP |
TNC PLUG R/A CLAMP |
|
SMB/SMC/SMS
Coaxial Connector 50ohm
/75 ohm
This
collection of connectors
are all the same type
but with different
coupling techniques:
-SMB has a
snap-on/snap-off
coupling allowing rapid
but secure connections
and is usable up to 4GHz
-SMB has a screw
coupling for vibration
environments and is
usable up to 10 GHz
-SMS has a slide
coupling, which is
suitable for rack and
panel systems and is
usable up to 4 GHz
The impedance is
controlled at 50 ohms
for all types. Connector
styles are available for
flexible conformable and
semi-rigid cables.
Versions of this series
connector are available
for mounting to printed
circuit boards using
both thru-hole soldered
and thru-hole press-fit
techniques, as well as
surface mount technology
(SMD).Solder and crimp
techniques are used to
terminate this series to
cables. SMB/SMC/SMS
connectors find
applications in all
types of electronic
equipment.
The impedance is
controlled at 50 ohms
for all types. Connector
styles are available for
flexible conformable and
semi-rigid cables.
Versions of this series
connector are available
for mounting to printed
circuit boards using
both thru-hole soldered
and t |
|
|
|
|
